|
| |
Models Below
|
Fold-Away
Bruno’s
Offset Fold-Away eliminates the struggle of taking apart your trunk
lift. The effort to lift the mast is a mere two pounds. It uses
dual-spring assist and color-keyed hand-holds to make it so easy, almost
anyone can do it!.
The offset design feature, in combination with Bruno’s industry-leading
adjustable low-profile outer arm, gives you the flexibility to load a
partially-assembled scooter from the driver side, behind the vehicle or
from the curb side.
Bruno's new Offset Fold-Away lift is engineered to operate with an
ergonomic pendant built into the outer lift arm.
Space-Saver
The Space-Saver is a take-apart lift that solves the problem of storing
a scooter in smaller vehicles with limited trunk space.
The Space-Saver fits closer to the interior trunk wall providing a
tighter arc when manually swinging the scooter in and out of the trunk.
This allows scooters to be stored in spaces that won't work with more
conventional lift designs, and the rotation of the lift arm makes it
possible to raise and lower the scooter at the rear or side of the
vehicle.
The Space-Saver can be stored anywhere, in the trunk or inside the
vehicle itself. And when an additional tower base installation kit is
ordered, the lift can be used in more than one vehicle. Contact Bruno's
Technical Application Department.
The Space-Saver is fully adjustable for height and length and can raise
scooters weighing up to 180 lbs. (82 kgs). The lift's tower base can be
easily adjusted to fit nearly any car's trunk, ensuring a useful,
reliable installation.
The Space-Saver is lightweight and assembly and disassembly can be
completed in three simple steps, quickly and easily.
|
Offset Space-Saver
The Offset Space-Saver from Bruno gives you the flexibility to
load a partially assembled scooter in the trunk of today's
smaller cars. The unique offset design of the lift arm allows
you to position your scooter inside narrow trunk openings.
The Offset Space-Saver permits lift installations for vehicles
with trunks that previously were considered too small. This
means that you don't have to purchase a different type of car.
And it means you don't have to go without the benefit of a lift
any longer.
The Offset Space-Saver is designed with a low-profile outer arm
lift assembly to make storing your scooter even easier. All
controls are located conveniently on top of the lift arm. Just
press a button and the Offset Space-Saver eliminates the
struggle of raising and lowering your scooter.
The Offset Spacer-Saver can be stored anywhere, in the trunk or
inside the vehicle. It disassembles quickly and easily,
requiring only three steps. When an additional tower base
assembly is ordered, it can even be used in more than one
vehicle. Contact Bruno's Technical Application Department for
installation details.
The Offset Space-Saver can raise and store many types of
three-wheel scooters weighing up to 180 lbs, with either front
or rear drive.
|
Scooter-Lift Jr.
The Scooter-Lift Jr. lift is electrically powered from
the vehicle's battery. Simply press a button on the
controller and the Scooter-Lift Jr. raises and lowers
your scooter, effortlessly.
Bruno's Scooter-Lift Jr. can be adapted to operate in
station wagons and hatchbacks. This versatility can
provide a significant benefit when a new vehicle
purchase is not in your budget.
Bruno's Scooter-Lift Jr. can end the struggle of
manually trying to lift and store a scooter in the trunk
or hatch opening of your vehicle. The Scooter-Lift Jr.
gives you the convenience you need to transport your
scooter, and the freedom to travel when and where you
want to.
The Scooter-Lift Jr. was designed to help raise and
store three-wheeled scooters in most auto trunks,
station wagons or hatchbacks, as long as the opening is
large enough to accept the partially disassembled
scooter and compact lift.
The Scooter-Lift Jr. is also available with the added
option of a spring-assist feature. This further reduces
the effort needed to raise and lower the lift arm before
and after use.
|
Scooter-Lift Sr.
The Scooter-Lift Sr. is electrically powered
from the vehicle's battery. Simply press a
button on the controller and the Scooter-Lift
Sr. raises and lowers your scooter, allowing you
to manually swing it in or out of the vehicle.
The Scooter-Lift Sr. is also available as the
VSL-560, featuring Bruno's exclusive Patented
Adjustable Sub-Base. The Adjustable Sub-Base
fits most vans, adds stability, is compact and
allows for faster, simpler installation.
Bruno's Scooter-Lift Sr. can end the struggle of
manually trying to lift and store a scooter in
your van or minivan. The Scooter-Lift Sr. gives
you the convenience you need to transport your
scooter and the freedom to travel when and where
you like.
The Bruno Scooter-Lift Sr. makes taking your
scooter with you simple and easy. No need to
remove and store the seat, and our custom
manufactured C-Arm and T-Bar Docking Device
allow you to raise you scooter at the touch of a
button.
The Scooter-Lift Sr. is also available with the
added option of a spring-assist feature. this
reduces the effort needed to raise and lower the
lift arm before and after use.
|
Scooter-Lift II
The Scooter-Lift II can raise and store
a fully assembled scooter or wheelchair
through the driver's or passenger's side
sliding door of minivans, and passenger
side doors of full size vans.
The Scooter-Lift II requires very little
arm strength, balance or effort to use.
It is so compact that even in a minivan,
there is still enough room for three
passengers to sit comfortably in the
rear seat. With scooter removed, or when
traveling without the scooter, entry and
exit is easy since the door opening
remains unobstructed.
Bruno's Scooter-Lift II also features an
optional installation assembly that
eliminates drilling any holes in the
floor of the vehicle. This means easier
removal when it comes time to transfer
the lift in and out of a minivan.
Contact Bruno's Technical Applications
Department about specific applications
for this system.
The Scooter-Lift II can be used for
either three-or four-wheel scooters and
manual folding or power wheelchairs
weighing up to 200 lbs. (91k). The
Scooter-Lift II's hand-held controller
makes this lift simple and easy to use.
The Scooter-Lift II uses electrical
power from the vehicle's battery and all
lift operations are automatic. You only
need to help guide the scooter or
wheelchair into place.
|
Out-Sider III
The Out-Sider III® is simple to
operate. Just turn the key and
move the control lever to the
position marked ARROW UP or
ARROW DOWN. The unit
automatically lifts and lowers
the scooter, as well as raising
and lowering the hold-tite
lock-down mechanism.
The Out-Sider III can raise and
store 3 or 4 wheel scooters
weighing up to 300 lbs., using a
Class III hitch with a 2"
receiver. The Out-Sider III
system is fully automatic and is
superior to any other rear
exterior lift. The unit is
powder coated and assembled with
stainless steel fasteners for
long life. In addition to these
features, a special weight
sensing device applies exactly
the right amount of pressure to
the hold-tite device to secure
the scooter.
Bruno's Out-Sider III features
an ON-OFF key for greater
security, and an automatic
emergency safety latch prevents
the platform from lowering. As a
result, the Out-Sider III gives
you an easy to use, secure way
to transport your scooter.
The Out-Sider III is powered by
your vehicle's battery and is
delivered fully equipped,
including a lighted license
plate holder, reflectors and a
D.O.T. approved center brake
light for added safety.
|
Big-Lifter
The Bruno Big-Lifter is
electrically powered
from the vehicle's
battery.
Simply press a button on
the controller and the
Big-Lifter™ raises and
lowers your fully
assembled power chair
weighing up to 300
pounds, allowing you to
manually swing it in or
out of the vehicle.
Minimum strength is
required.
The Bruno Big-Lifter
manual swing has a
low-resistance design
that is easy to swing in
and out, and comes
complete with a lifting
device designed
specifically for the
power chair.
The Bruno Big-Lifter is
a fully adjustable lift
that can be installed in
just a few hours and
requires no structural
modification to the
vehicle.
The Bruno Big-Lifter
securely stores your
scooter or power chair
in the rear of most
vans, minivans and sport
utility vehicles:
positioned behind the
rear seat
Curb-Sider
Bruno's Curb-Sider can
end the struggle of
trying to manually lift
and store a scooter in
your van or minivan. The
Bruno Curb-Sider was
designed to fit most
types of vans, minivans,
sport utility vehicles
and pickups with caps.
Plus, the Curb-Sider can
be adapted for use with
some types of power
wheelchairs, increasing
its versatility.
The Curb-Sider lift is
electrically powered
from the vehicle's
battery. Simply press a
button on the hand-held
controller, and the
Curb-Sider raises and
lowers any scooter
weighing up to 200 lbs.,
effortlessly.
Bruno's Curb-Sider
provides a unique 180
degree powered rotation,
which makes it possible
to raise, lower and
rotate a fully assembled
scooter on the curb, at
the side of your
vehicle, or directly
behind it.
The Curb-Sider's
rotation feature allows
it to stow scooters in
vehicles with tailgates.
The lift arm can be
folded vertically when
not in use and
installation does not
require any structural
modifications to your
vehicle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
